Evaluating the Irritant Factors of Silicone and Hydrocolloid Skin Contact Adhesives Using Trans-Epidermal Water Loss, Protein Stripping, Erythema, and Ease of Removal

Evaluating the Irritant Factors of Silicone and Hydrocolloid Skin Contact Adhesives Using Trans-Epidermal Water Loss, Protein Stripping, Erythema, and Ease of Removal

We’re delighted to announce a last minute publication to close out the year of 2023! Our work on silicone skin adhesives, following a long initial collaboration with Trio Healthcare, has been published in ACS Applied Bio Materials, and is available open access for you to read as of December 27th 2023 on the ACS website!

Abstract:

A composite silicone skin adhesive material was designed to improve its water vapor permeability to offer advantages to wearer comfort compared to existing skin adhesive dressings available (including perforated silicone and hydrocolloid products). The chemical and mechanical properties of this novel dressing were analyzed to show that it has a high creep compliance, offering anisotropic elasticity that is likely to place less stress on the skin. A participant study was carried out in which 31 participants wore a novel silicone skin adhesive (Sil2) and a hydrocolloid competitor and were monitored for physiological response to the dressings. Trans-epidermal water loss (TEWL) was measured pre- and postwear to determine impairment of skin barrier function. Sil2 exhibited a higher vapor permeability than the hydrocolloid dressings during wear. Peel strength measurements and dye counter staining of the removed dressings showed that the hydrocolloid had a higher adhesion to the participants’ skin, resulting in a greater removal of proteins from the stratum corneum and a higher pain rating from participants on removal. Once the dressings were removed, TEWL of the participants skin beneath the Sil2 was close to normal in comparison to the hydrocolloid dressings that showed an increase in skin TEWL, indicating that the skin had been highly occluded. Analysis of the skin immediately after removal showed a higher incidence of erythema following application of hydrocolloid dressings (>60%) compared to Sil2, (<30%). In summary, this modified silicone formulation demonstrates superior skin protection properties compared to hydrocolloid dressings and is more suitable for use as a skin adhesive.

P15 Surface engineering of novel polydimethylsiloxane composites to attract bacteria: potential to treat chronic infected wounds and reduce antimicrobial resistance

P15 Surface engineering of novel polydimethylsiloxane composites to attract bacteria: potential to treat chronic infected wounds and reduce antimicrobial resistance

Dr Katsikogianni has worked with the Centre for Skin Science to publish a new article on novel polydimethylsiloxane composites patterned to attract bacteria. You can read the full article at the British Journal of Dermatology website here: https://academic.oup.com/bjd/article-abstract/189/1/e19/7221211?redirectedFrom=fulltext&login=false

Read more →

Edward Dyson

Edward Dyson at Macro Young Researchers Meeting 2023

Research technician for the Polymer Biomaterials Group.

Edward Dyson is responsible for looking after our analytical equipment (such ass size exclusion chromatography, microscopes, fluorescence spectrometers). Without this equipment our cutting edge research into biomaterials would not be possible. He also takes an active role in laboratory management and promoting positive research culture.

Read more →
Chain-Extendable Crosslinked Hydrogels Using Branching RAFT Modification

Chain-Extendable Crosslinked Hydrogels Using Branching RAFT Modification

We are delighted to announce publication of new work incorporating our branching chain transfer agent into crosslinked hydrogels, to produce novel functional materials. The full manuscript is available open access on MDPI Gels.

Abstract:

Functional crosslinked hydrogels were prepared from 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AA). The acid monomer was incorporated both via copolymerization and chain extension of a branching, reversible addition–fragmentation chain-transfer agent incorporated into the crosslinked polymer gel. The hydrogels were intolerant to high levels of acidic copolymerization as the acrylic acid weakened the ethylene glycol dimethacrylate (EGDMA) crosslinked network. Hydrogels made from HEMA, EGDMA and a branching RAFT agent provide the network with loose-chain end functionality that can be retained for subsequent chain extension. Traditional methods of surface functionalization have the downside of potentially creating a high volume of homopolymerization in the solution. Branching RAFT comonomers act as versatile anchor sites by which additional polymerization chain extension reactions can be carried out. Acrylic acid grafted onto HEMA–EGDMA hydrogels showed higher mechanical strength than the equivalent statistical copolymer networks and was shown to have functionality as an electrostatic binder of cationic flocculants.

Stabilisation of acrylic latexes containing silica nanoparticles for dirt repellent coating applications

Stabilisation of acrylic latexes containing silica nanoparticles for dirt repellent coating applications

Abstract:

This study examines the feasibility of using colloidal silica nanoparticles as active agents in high concentration waterborne polymer latex formulations. We showed that distributing the silica throughout the waterborne emulsion formed a composite coating material with a hydrophilic surface that consequently reduced exterior dirt pickup. Two grades of silica nanoparticles were studied, one using sodium stabilisation and another using epoxysilane modification to introduce glycidoxypropyltrimethoxysilane surface functionality. Rheological study of the waterborne latex on mixing showed that there was an immediate pH responsive interaction between the silica sols and the polymer latex. Once loading of sodium charge stabilised silica NPs exceeded the volume required for heteroflocculation to occur the mixture demonstrated the potential to gel on standing – a process which took weeks, or months, to occur depending on the pH and relative concentrations used. At least fifty percent silane modification to the NP surface was found to be necessary to maintain a stable colloidal dispersion for long term storage of the waterborne latex. Despite this both grades of silica were found to imbue reductions in dirt pickup when applied to exterior masonry concrete studies over a 3-month weathering test.

Investigation into the development of novel lanthanide-based luminescent colorants for application to textiles and paper materials

Investigation into the development of novel lanthanide-based luminescent colorants for application to textiles and paper materials

We are proud to announce that we have collaborated with colleagues from the School of Textiles at the University of Leeds to assist in their development of security ink and dyes. These invisible dyes are shown to successfully bind to fabrics and only reveal themselves under UV light. Read more here: https://onlinelibrary.wiley.com/doi/full/10.1111/cote.12675

Read more →